logo large white.png

AEROMOS UNO IP
MICROPHONE ON-AIR SWITCH

White Room

SPECIFICATIONS

logo large white.png

POWER LED INDICATOR

logo large white.png

MIC OUT (TO STUDIO)

logo large white.png

MIC ON-AIR ARM

logo large white.png

GPI STUDIO

logo large white.png

Axia TCP link

logo large white.png

Global TCP receive

logo large white.png

DHD Global logic support

logo large white.png

3 ways to switch the MIC ON-AIR SWITCH

logo large white.png

Option 1: TCP link (Axia TCP, Global TCP receive or DHD global logic)

logo large white.png

Option 2: 5VDC control voltage (10mA)

logo large white.png

Option 3: Closed contact

logo large white.png

12VDC POWER INPUT

MOS-UNO_IP_stereozijde.png
 

DESCRIPTION

 

Suitable for signalling of on-air lamps for microphones. eg YELLOWTEC MIKA ON-AIR MIC ARM.


ON-AIR = red
OFF-AIR: white


The MOS-UNO-IP is unique in it’s kind. Not only does it support GPI, but also Axia’s TCP commands, global TCP link for external servers or DHD’s Ethernet global logic, making GPI hand soldering obsolete. The internal webserver allows full configuration of all needed settings.

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. Polarity is not important
Power supply is included, options: 115V/USA - 230V/AUS - 230V/EUR - 230V/UK

MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable (XLR 3pin)


- PIN1: Ground (Shield)
- PIN2: Positive (Red)
- PIN3: Negative (Blue)

MIC ONAIR ARM
Connect to the MIC ON-AIR ARM with standard MIC cable (XLR 5pin)


- PIN1: Ground (Shield)
- PIN2: Positive (Red)
- PIN3: Negative (Blue)
- PIN4: LED (Yellow)
- PIN5: LED (Black)