logo large white.png

AEROMOS QUATRO
MICROPHONE ONAIR SWITCH FOR 4 MICS

White Room

SPECIFICATIONS

logo large white.png

4x LED INDICATOR

logo large white.png

4x MIC OUT (TO STUDIO)

logo large white.png

4x MIC ONAIR ARM

logo large white.png

GPI STUDIO

logo large white.png

2 ways to switch the MIC ONAIR SWITCH

logo large white.png

Option 1: 5VDC control voltage (10mA)

logo large white.png

Option 2: Open and closed contact

logo large white.png

12VDC POWER INPUT

 

DESCRIPTION

 

Suitable for signalling of onair lamps for microphones. eg YELLOWTEC MIKA ONAIR MIC ARM.


ON-AIR: red
OFF-AIR: white

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. The polarity is not important
Power supply is included, options: 115V/USA - 230V/AUS - 230V/EUR - 230V/UK

4x MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable
(XLR 3pin)
- PIN1: Ground (Shield)
- PIN2: Positive (Red)
- PIN3: Negative (Blue)

4x MIC ONAIR ARM
Connect to the MIC ONAIR ARM with standard MIC cable (XLR 5pin)
- PIN1: Ground (Shield)
- PIN2: Positive (Red)
- PIN3: Negative (Blue)
- PIN4: LED (Yellow)
- PIN5: LED (Black)